Research 
Journal Articles and Conference Papers (Students are underlined):

Energy Conversion:
  1. A.J. Williamson and K.A. Sallam*, “Improving Vapor Compression Cycle Performance using Compressor-Expander Heat Transfer,” ASHRAE Journal, Volume 65, No. 4, 44-49, April 2023.
  2. A.J. Williamson, S. Srivastava, and K.A. Sallam*, “Validating Confined Flame Noise Simulation Using External Sensor,” Sensors 2022, 22(20), 8039; https://doi.org/10.3390/s22208039.
  3. E.-O. Enwa*, S. Pradhan, P.K. Bikkina, and K.A. Sallam, “Preparation of Superhydrophilic Copper and Brass Surfaces using TiO2Nanoparticles for Novel Nucleation Boiling Application,” The 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19), Brussels, Belgium, March 6 - 11, 2022.
  4. N. Indrawan, A. Kumar, M. Moliere, K.A. Sallam, R.L. Huhnke, “Distributed power generation via gasification of biomass and municipal solid waste: A review,” Journal of the Energy Institute (2020), doi: https://doi.org/10.1016/j.joei.2020.07.001 (Times cited: 5).​
  5. A. Herrington, and K.A. Sallam, “On PIV measurements of Diffusion Flames,” Proceedings of ASTFE 2ndThermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017.
Atomization and Sprays:
  1. K.A. Sallam*, M.S. Raza, “Spray Drift due to Bag Breakup of Fan Sheet,” Proceedings of 33rd Annual Conference on Liquid Atomization and Spray Systems, Albuquerque, NM, May 14–17, 2023.
  2. C.D. Scott, K.A. Sallam*, K.-C. Lin, S.D. Hammack, and C.D. Carter, “Using Holographic Imaging to Study Fuel Injection in High-Speed Flows,” Proceedings of 33rd Annual Conference on Liquid Atomization and Spray Systems, Albuquerque, NM, May 14–17, 2023.
  3. M.S. Raza and K.A. Sallam*, “Primary Breakup of Liquid Fan Sheet in Crossflow,” J. Aerosol Science, Volume 169, March 2023, 106135. https://doi.org/10.1016/j.jaerosci.2022.106135.
  4. M.S. Raza, A. Valiaev, and K.A. Sallam, “Air-Assisted Atomization of Beveled Needle Point Injector,” Proceedings of 15th Triennial International Conference on Liquid Atomization and Spray Systems, Edinburgh, UK, 29 Aug. – 2 Sept.26, 2021.
  5. M.S. Raza, K.A. Sallam, and S.L. Post, “The Effect of Crosswind Velocity on the Spray Drift of Flat Fan Nozzle,” ASME Paper No. IMECE2019-12049, Proceedings of International Mechanical Engineering Congress and Exposition (IMECE), Salt Lake City, Utah, November 11-14, 2019. doi.org/10.1115/IMECE2019-12049
  6. K.A. Sallam, “Core Breakup of Turbulent Liquid Sheets,” 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Wicklow, Ireland, July 22–24, 2019.
  7. K.A. Sallam, K.-C. Lin, S.D. Hammack, and C.D. Carter, “Effect of Nozzle Geometry on Aerated-Liquid Injection in Supersonic Crossflow,” Proceedings of 14thInternational Conference on Liquid Atomization and Spray Systems, Chicago, IL, July 22–26, 2018.
  8. K.A. Sallam, K.-C. Lin, S.D. Hammack, and C.D. Carter, “Digital Holographic Analysis of the Breakup of Aerated Liquid Jets in Supersonic Crossflow,” AIAA Paper No. 2017-1957, 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas, January 2017. (Times cited: 4) doi.org/10.2514/6.2017-1957
  9. A. Adebayo, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Drop Size and Velocity Distributions of the Spray of Aerated Injection in Subsonic Crossflow,” Proceedings of ICLASS 2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, August 23-27, 2015.
  10. Olinger, D.S., Sallam, K.A., Lin, K.-C., and Carter, C.D., (2014) "Digital Holographic Analysis of the Near Field of Aerated-Liquid Jets in Crossflow," Journal of Propulsion and Power, Vol. 30, No. 6, pp. 1636-1645, doi: http://arc.aiaa.org/doi/abs/10.2514/1.B34984 (Times cited: 12).
  11. D.S. Olinger, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Image Processing Algorithms for Digital Holographic Analysis of Near-Injector Sprays,” Proceedings of the ILASS Americas, 25th Annual Conference on Liquid Atomization and Spray Systems, Pittsburgh, PA, May 2013. (Times cited: 2)
  12. D.S. Olinger, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Digital Holographic Analysis of Near-Field Aerated Liquid Jets in Crossflow. Part II: Measurements,” AIAA Paper No. 2013-0167, 51thAIAA Aerospace Sciences Meeting, Grapevine, Texas, January 2013. (Times cited: 3)
  13. D.S. Olinger, J. Lee, A. Osta, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Digital Holographic Analysis of Near-Field Aerated Liquid Jets in Crossflow. Part I: Algorithm Development,” AIAA Paper No. 2013-0164, 51thAIAA Aerospace Sciences Meeting, Grapevine, Texas, January 2013. (Times cited: 3)
  14. Osta, A.R., Lee, J., Sallam, K.A., and Fezzaa, K., (2012), “Study of the Effects of the Injector Length/Diameter ratio on the Surface Properties of Turbulent Liquid Jets in Still Air using X-ray Imaging,” International Journal of Multiphase Flow, Vol. 38, pp. 87–98 (Times cited: 17) (Journal Impact Factor: 2.509).
  15. Osta, A.R., and Sallam, K.A., (2010) “Nozzle-Geometry Effects on the Upwind Surface Properties of Turbulent Liquid Jets in Gaseous Crossflow,” J. Prop. Power, Vol. 26, No. 5, pp. 936-946 (Times cited: 28). doi.org/10.2514/1.49737
  16. K.A. Sallam, K.-C. Lin, and C.D. Carter, “Spray Structure of Aerated Liquid Jets using Double-View Digital Holography,” AIAA paper No. 2010-194, 48thAIAA Aerospace Sciences Meeting, Orlando, Florida, January 2010. (Times cited: 1)
  17. A. Osta, J. Lee,, K.A. Sallam, and K. Fezzaa “Investigating the Effect of the Injector Length/Diameter ratio on the Primary Breakup of Liquid Jets using X-ray Diagnostics,” Proceedings of 11th International Conference on Liquid Atomization and Spray Systems, Vail, Colorado, July 26–30, 2009.
  18. Lee, J., Sallam, K.A., Lin, K.-C., and Carter, C.D., (2009), “Spray Structure in Near-Injector Region of Aerated Jet in Subsonic Crossflow,” J. Prop. Power,Vol. 25, No. 2, pp. 258-266 (Times cited: 24). doi.org/10.2514/1.36719
  19. Lee, J., Miller, B., and Sallam,K.A., (2009), “Demonstration of Digital Holographic Diagnostics for the Breakup of Liquid Jets Using a Commercial-Grade CCD Sensor,” Atom. Sprays,Vol. 19, No. 5, pp. 445-456 (Times cited: 17) (Journal Impact Factor: 1.289) . DOI: 10.1615/AtomizSpr.v19.i5.30
  20. D.S. Olinger, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Effects of GLR on the Spray Structure in the Near-Injector Region of Aerated Liquid Jets in Subsonic Crossflow,” AIAA paper No. 2009-1373, 47thAIAA Aerospace Sciences Meeting, Orlando, Florida, January 2009. (Times cited: 4)
  21. A. Osta, and K.A. Sallam, “The Effect of the Nozzle Length to Diameter Ratio on the Surface Properties of Turbulent Liquid Jets in Gaseous Crossflow,” AIAA paper No. 2009-1374, 47thAIAA Aerospace Sciences Meeting, Orlando, Florida, January 2009. (Times cited: 1)
  22. Ng, C.-L., Sankarakrishnan, R., and Sallam, K.A.,(2008), “Bag Breakup of nonturbulent liquid jets in crossflow,” Int. J. Multiphase Flow,Vol. 34, No. 3, pp. 241-259 (Times cited: 117) (Journal Impact Factor: 2.509). 
  23. Miller, B.,Sallam, K.A., Bingabr, M., Lin, K.-C., and Carter, C.D., (2008), “Breakup of Aerated Liquid Jets in Subsonic Crossflow,” J. Prop. Power, Vol. 24, No. 2, pp. 253-258 (Times cited: 22) (Journal Impact Factor: 1.144). doi.org/10.2514/1.30390
  24. D.S. Olinger and K.A. Sallam, “Toward a Fully-Automated Digital Holographic Spray Analyzer,” AIAA Paper No. 2008-4045, 38thFluid Dynamics Conference, Seattle, Washington, June, 2008.
  25. D.S. Olinger, J. Lee, A. Osta, and K.A. Sallam, “Single- and Double-View Digital Holographic Diagnostics for Sprays,” Proceedings of 21stAnnual ILASS-Americas Conference, Orlando, Florida, May 18–21, 2008.
  26. J. Lee, K.A. Sallam, K.-C. Lin and C.D. Carter, “Spray Structure in Near-Injector Region of Aerated Jet in Subsonic Crossflow,” AIAA paper No. 2008-1043, 46thAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2008.
  27. A.R. Osta, and K.A. Sallam, “Effect of Injector Length/Diameter Ratio on the Breakup of Round Liquid Jet in Crossflow,” AIAA paper No. 2008-1040, 46thAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2008. (Times cited: 3)
  28. Lee, K., Aalburg, C., Diez, F.J., Faeth, G.M., and Sallam, K.A., (2007), “Primary Breakup of Turbulent Round Liquid Jets in Uniform Crossflows,” AIAA Journal, Vol. 45, No. 8, pp. 1907-1916 (Times cited: 106). doi.org/10.2514/1.19397
  29. J. Lee,, B. Miller, K.A. Sallam, and M. Bingabr, “Digital Double-Pulsed Microscopic Holography Diagnostics for Sprays using Commercial-Grade CCD,” International Conference on Multiphase Flow, ICMF 2007, Leipzig, Germany, July 9 – 13, 2007.
  30. J. Lee, B. Miller, K.A. Sallam, K.-C. Lin, and C.D. Carter, “Velocity and Size Measurements of Aerated Spray using Digital Microscopic Holography,” ILASS-AMERICAS 2007, May 15-18, 2007 - Chicago, Illinois.
  31. B. Miller, K.A. Sallam, M. Bingabr, K.-C. Lin and C. Carter, “Secondary Breakup of Aerated Liquid Jets in Subsonic Crossflow,” AIAA paper No. 2007-1342, 45thAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2007  (Times cited: 13).
  32. Sallam, K.A., Aalburg, C., Faeth, G.M., Lin, K.-C., Carter, C.D., and Jackson, T.A., (2006), “Primary Breakup of Aerated-Liquid Jets in Supersonic Crossflows,” Atomization and Sprays,Vol. 16, No. 6, pp. 657-672 (Times cited: 52) (Journal Impact Factor: 1.289). DOI: 10.1615/AtomizSpr.v16.i6.40B. Miller, K.A. Sallam, K.-C. Lin and C. Carter, “Digital Holographic Spray Analyzer,” ASME paper No. FEDSM2006-98526, ASME Joint U.S.-European Fluids Engineering Summer Meeting, Miami, Florida, July 2006. (Times cited: 5) doi.org/10.1115/FEDSM2006-98526
  33. K.A. Sallam, C. Aalburg, K. Lee, C.-L. Ng and R. Sankarakrishnan“Breakup of Turbulent and Non-Turbulent Liquid jets in Gaseous Crossflows,” AIAA paper No. 2006-1517, 44thAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2006, (Invited).(Times cited: 33)
  34. K. Lee, J.F. Diez, G.M. Faeth, C. Aalburg, and K.A. Sallam, “Breakup of Round Turbulent Liquid Jets in Air Crossflows,” Proceedings of the 18thAnnual Conference on Liquid Atomization and Spray Systems, Irvine, CA, May 2005 (Awarded the Marshall Award, Toronto, Canada, 2006).
  35. R. Sankarakrishnan, K.A. Sallam, and F.W. Chambers “Effects of Turbulence on the Breakup of Round Liquid Jets in Gaseous Crossflow,” ASME paper No. FEDSM2005-77407, ASME Fluids Engineering Summer Conference, Houston, TX, June 2005. (Times cited: 2) doi.org/10.1115/FEDSM2005-77407
  36. C.-L. Ng, K.A. Sallam, H.M. Metwally, and C. Aalburg “Deformation and Surface Waves Properties of Round Nonturbulent Liquid Jets in Gaseous Crossflow,” ASME paper No. FEDSM2005-77469, ASME Fluids Engineering Summer Conference, Houston, TX, June 2005. (Times cited: 4) doi.org/10.1115/FEDSM2005-77469
  37. Aalburg, C., Van Leer, B., Faeth, G.M., and Sallam, K.A., (2005), “Properties of Nonturbulent Round Liquid Jets in Uniform Gaseous Crossflows,” Atomization and Sprays,Vol. 15 No. 3, pp. 271-294 (Times cited: 76).
  38. C. Aalburg, G.M. Faeth, and K.A. Sallam, “Primary Breakup of Round Turbulent Liquid Jets in Uniform Gaseous Crossflows,” AIAA paper No. 2005-0734, 43rdAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2005. (Times cited: 22)
  39. Sallam, K.A., Aalburg, C., and Faeth, G.M., (2004), “Breakup of Round nonturbulent Liquid Jets in Gaseous Crossflows,” AIAA Journal, Vol. 42, No. 12, pp. 2529-2540 (Times cited: 291). doi.org/10.2514/1.3749
  40. K.A. Sallam, C. Aalburg, G.M. Faeth, K.-C. Lin, C.D. Carter, and T.A. Jackson “Breakup of Aerated-Liquid Jets in Supersonic Crossflows,” AIAA paper No. 2004-0970, 42ndAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2004. (Times cited: 10)
  41. C. Aalburg, K.A. Sallam, and G.M. Faeth, “Properties of Nonturbulent Round Liquid Jets in Uniform Crossflows,” AIAA paper No. 2004-0969, 42ndAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2004.
  42. K.A. Sallam, C. Aalburg, G.M. Faeth, K.-C. Lin, C. D. Carter, and T. A. Jackson “Primary Breakup of Aerated-Liquid Jets in Uniform Gaseous Crossflows,” Proceedings ofthe 19th Annual Conference, ILASS-Europe, Nottingham, UK, September 2004.
  43. K.A. Sallam, C. Aalburg, and G.M. Faeth, “Primary Breakup of Nonturbulent Round Liquid Jets in Uniform Gaseous Crossflows,” Proceedings of the19th Annual Conference, ILASS-Europe, Nottingham, UK, September 2004.
  44. K.A. Sallam, C. Aalburg, G.M. Faeth, K.-C. Lin, C.D. Carter, and T. A. Jackson “Properties of Aerated-Liquid Jets in Supersonic Crossflows,” Proceedings of the 17thAnnual Conference on Liquid Atomization and Spray Systems, Arlington, Virginia, May 2004.
  45. Sallam, K.A., and Faeth, G.M., (2003), “Surface Properties during Turbulent Primary Breakup of free Liquid Jets,” AIAA Journal, Vol. 41, pp. 1514-1524 (Times cited: 92). doi.org/10.2514/2.2102
  46. K.A. Sallam, C. Aalburg, and G.M. Faeth, “Primary Breakup of Nonturbulent Liquid Jets in Gaseous Crossflows,” Proceedings of the 16thAnnual Conference on Liquid Atomization and Spray Systems, Monterey, California, May 2003(Featured on the conference proceeding cover).
  47. K.A. Sallam, C. Aalburg, and G.M. Faeth, “Primary Breakup of Round Nonturbulent Liquid Jets in Gaseous Crossflows,” AIAA Paper No. 2003-1326, 41stAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2003. (Times cited: 5)
  48. Sallam, K.A., Dai, Z., and Faeth, G.M., (2002), “Liquid Breakup at the Surface of Turbulent Round Liquid Jets in Still Gases,” International Journal of Multiphase Flow,Vol. 28, pp. 427-449 (Times cited: 252).
  49. K.A. Sallam, Z. Dai, and G.M. Faeth, “Turbulent Primary Breakup of Round and Plane Liquid Jets in Still Air,” AIAA Paper No. 2002-1115, 40thAIAA Aerospace Sciences Meeting, Reno, Nevada, January 2002. (Times cited: 6)
  50. Sallam, K.A., Dai, Z., and Faeth, G.M., (1999), "Drop Formation at the Surface of Plane Turbulent Liquid Jets in Still Gases," International Journal of Multiphase Flow,Vol. 25, pp. 1161-1180 (Times cited: 67) (Journal Impact Factor: 2.509).
  51. K.A. Sallam, Z. Dai, and G.M. Faeth, "Breakup of Turbulent Liquid Jets in Still Gases," AIAA Paper No. 99-3759, 30thAIAA Fluid Dynamics Conference, Norfolk, Virginia, June 1999 (Times cited: 5). 
  52. K.A. Sallam, Z. Dai, and G.M. Faeth, "Breakup Lengths of Turbulent Liquid Jets in Still Gases," Proceedings of the 12thAnnual Conference on Liquid Atomization and Spray Systems, Indianapolis, Indiana, May 1999, pp. 219-223.
  53. Z. Dai, K.A. Sallam, and G.M. Faeth, "Turbulent Primary Breakup of Plane Free Bow Sheets," Proceedings of the 22ndSymposium on Naval Hydrodynamics, National Academy Press, Washington, D.C., 1998, pp. 568-581.

Fluid Mechanics:
  1. S. Srivastava, A.M. Sheridan, M. Henneke, M.S. Raza, and K.A. Sallam*, “The Structure of Inclined Choked Gas Jet,” J. Fluids Eng. Oct 2022, 144(10): 101301. https://doi.org/10.1115/1.4054139
  2. S. Srivastava, A.M. Sheridan, M. Henneke, and K.A. Sallam, “Computational and Experimental Investigation of Inclined Choked Injection of Gaseous Jet,” AIAA Paper No. 2020-2027, AIAA SciTech Forum, Orlando, Florida, January 6-10, 2020. doi.org/10.2514/6.2020-2027
  3. A.M. Sheridan, S. Srivastava, M. Henneke, M.S. Raza, and K.A. Sallam, “Inclined Injection of Under expanded supersonic Gas Jet,” ASME Paper No. IMECE2019-12020, Proceedings of International Mechanical Engineering Congress and Exposition (IMECE), Salt Lake City, Utah, November 11-14, 2019. doi.org/10.1115/IMECE2019-12020 (Times cited: 1)
  4. T.E. Crane and K.A. Sallam, “Micro Liquid Jet Breakup and Pinch-off in Immiscible Liquid-Liquid Systems,” 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Wicklow, Ireland, July 22–24, 2019.
  5. J. Lee and K.A. Sallam (2017), “Column Thickness Variation of 100-um Liquid Jets in Still Air,” Atomization and Sprays, 17 (1): 1-13. (Times cited: 3) (Journal Impact Factor: 1.289)
  6. S. Simon, and K.A. Sallam, “Simulation of the Flow of Single Stranded DNA through a Microchannel using Dissipative Particle Dynamics,” Proceedings of ASTFE 2ndThermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017. 
  7. A. Choudhari, and K.A. Sallam, “Simulation of Supersonic Injection of Aerated Liquid Jet,” Proceedings of ASTFE 2ndThermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017.
  8. Lee, J., and Sallam, K.A., (2014), “Three Dimensional Trajectory of Electrospun Polymer Solution Jet using Digital Holographic Microscopy,” Polymer Engineering and Science, Vol. 54, No. 8, pp. 1765-1773 (Times cited: 6).
  9. Ng, C.-L., and Sallam, K.A., “Simulation of Laminar Liquid Jets in Gaseous Crossflow before the Onset of Primary Breakup,” ASME paper No. IMECE2011-65338, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Colorado, November 11-17, 2011. (Times cited: 4) doi.org/10.1115/IMECE2011-65338
  10. Shukla, R., and Sallam, K.A., (2009) “Effect of Liquid Transparency on Laser-Induced motion of Drops,” J. Fluids Engineering, Vol. 131, No. 8, 081301-1 – 081301-7 (Times cited: 1).
  11. A.M. El-Leathy and K.A. Sallam, “Effect of Polymer Concentration on Beads Formation during Electro Spinning of Nanofibers,” Twelfth International Conference on Aerospace Sciences and Aviation Technology, ASAT-12, May 29-31, 2007, Cairo, Egypt.
  12. K.A. Sallam, A.S. Sabry, M.A. Serag-Eldin, and M.A. Fouad, "Characteristics Based Nonlinear Simulation of Reactive Silencers," Proceedings of the International Congress on Fluid Dynamics & Propulsion, Cairo, Egypt, December 1996, pp. 370-385.

Water Treatment & Desalination:
  1. A. Williamson, and K.A. Sallam, “Human Powered Desalination Unit,” ASME Paper No. IMECE2019-12046, Proceedings of International Mechanical Engineering Congress and Exposition (IMECE), Salt Lake City, Utah, November 11-14, 2019. doi.org/10.1115/IMECE2019-12046
  2. N. Davis, and K.A. Sallam, “Modeling of Membrane Fouling for Rotating Filtration Systems,” Proceedings of ASTFE 2ndThermal and Fluids Engineering Conference, Las Vegas, Nevada, April 2-5, 2017.
Proudly powered by Weebly